| Application range: Material…………………………………: various compound films; laminated films; multilayers films Roll folding……………………………..: max.width : 850mm,max.diameter: 600mm Performance: Bags making speed …………………….: 180 repeatings/min. (designed speed: approx.3000mm) Bags making width……………………..: max.400mm Bags making length……………………..: 30-2400mm (multiple conveying device can be adopted when the overlengeh is set), when the preset length is above 320mm.,The system will change to multiple conveyances Note……………………………………..: the actual operation speed will redce for the reason of differences of the bag length and materials. Unwinding mode: Main material…………………………..: put the warp beam horizontally Control …………………………………: with automatic tension device by swimming rollers, magnetic powder brake, displacement sensor Feeding devices: Material feeding……………………….: synchronous drive of stepping motors (or servo motors) Upper & lower sealing press………….: driven by stepping motors (or servo motors) Control functions: Heating seal……………………………: speed of heat seal, duration of heat seal, Proportion of heat seal, acceleration Temperature……………………………: contact-free automatic control,CRT displaying Counting ……………………………….: presetting is available Punching device……………………….: time can be preset, continuous or interval punching mode is available Working mode ………………………..: printing, non- printing Mode of multiple conveyances……….: from twice to six times conveyances Measurement for length……………….: distance between color scales can be measured by photocell Selectivity……………………………..: feeding without movement,upper & lower regulating trimmer can be selected Alarm………………………………….: lost of printed point; lost of set temperature; warping alarm; servo motor alarm; tension alarm and auto - switch off the machine running Electricity - comsumption: Feeding servo motors…………………: 1.00kw × 2 = 2.00kw Upper & lower driving AC motors……: 2.20kw × 1 = 2.20kw Warping traction motor………………..: 0.75kw × 1 = 0.75kw Central heat seal device………………..: 2.00kw × 1 = 2.00kw Horizontal heat seal device…………....: 4.00kw × 3 = 12.00kw Trimming for central sealing…………..: 2.00kw × 2 = 4.00kw Control system and others……………..: 1.00kw Total consumption……………………..: approx.24.00kw Gas pressure……………………………: 0.60mpa (6kwf/cm?) Cooling water………………………….: approx. 15L/min. Gross weight of equipment…………….:3 tons Dimensions (L X W X H)……………….: 7200 × 1300 × 1300mm Control mode: Adopts the industrial control equipment, domestic displayer. Adopts PLC to control, touching screen displaying Adopts multiple proximity swithches system
|
Specification