Application range:
Material…………………………………………..: various compound films; laminated films; multilayers films
Roll folding………………………………………: max. width:1200mm, max. diameter: 600mm
Auxiliary material………………………………..: max.width: 130mm, max.diameter: 350mm
Performance:
Bags making speed……………………....………: 150 repeatings/min. (designed speed :approx.3000mm)
Bags making width…………………………….…: max. 600mm
Bags making length………………………………: 30-500mm ( multiple conveying device can be adopted when the overlength is set),when the preset length is above 320mm,The system will change to multiple conveyances.

Note………………………………………………: the actual operation speed will reduce for the reason of differences of the bag length and materials.
Unwinding mode:
Main material……… ………….....: put the warp beam horizontally
Auxiliary material……………………….………: put the warp beam horizontally, with triangle folding device
Conteol……………………………………….….: with automatic tension device by swimming rollers magnetic powder brake,displacement sensor
Feeding devices:
Material feeding………………………………...: synchronous drive of stepping motors (or servo motors)
Upper & lower sealing press……………………: driven by stepping motors (or servo motors)
Control functions:
Heating seal……………………………………..: speed of heat seal, duration of heat seal, proportion of heat seal,acceleration
Temperature…………………………………..….: contact-free automatic control.CRT displaying
Counting……………………………….………...: presetting is available
Punching device……………………..…………: time can be preset,continuous or interval punching mode is available
Working mode……………………………………: printing, non-printing
Mode of multiple conveyances……………….…..: from twice to six times conveyances
Measurement for length……………………….….: distance between color scales can be measured by photocell
Selectivity………………………………….……..: feeding without movement,upper & lower regulating trimmer can be selected
Alarm…………………………………………….: lost of printed point; lost of set temperature; warping alarm; servo motor alarm; tension alarm and auto-switch off the machine running
Electricity-comsumption:
Feeding synchronous drive of motors………….: 1.00kw × 2 = 2.00kw
Upper & lower driving AC motors…………..…: 2.20kw × 1 = 2.20kw
Warping traction motor……………….…………:0.75kw×1 =0.75kw
Side heat seal device………………………………: 4.00kw × 3 = 12.00kw
Horizontal heat seal device……………………….: 4.00 × 3 = 12.00kw
Auxiliary material traction motor…………………: 0.90 × 2 = 1.80kw
Control system and other …………………………:3.00kw
Total consumption…………………………………:approx.33.00kw
Gas pressure……………………………………….:0.60mpa (6kwf/cm?)
Cooling water……………………………………...: approx.15L/min.
Gross weight of equipment………………………..: 4 tons
Dimensions (L X W X H )…………………………: 8700×1400×1680mm
Control mode:
Adopts the industrial control equipment, domestic displayer.
Adopts PLC to control, touching screen displaying
Adopts multiple proximity switches system